Friday, September 12, 2014

Some Cool Buttons

Before I get into some of the buttons that are on our new console, I want to talk about all of the buttons that were there already.

As I mentioned a couple of weeks ago, there are lots of intriguing sounds that can be made on an organ. There are six basic families of sound (flutes, foundations, reeds, strings, mutations, and mixtures) and within those families lots of different kinds of specific ranks of pipes, some wooden, some metal, some long, some short, and having a number of different properties that contribute a specific sound to the organ. Each organ is different--no two diapason stops sound quite alike, even though you can find diapason stops on just about every organ, since that is a basic foundation stop (though it might be labelled principle or montre).

Some of those stops don't sound very good by themselves, and need to be combined with others for full effect. This is where the art of organ registration comes in; the knowledge of how to combine different sounds effectively takes practice, and practical knowledge, some trial and error, historical awareness, and so on.

And what if you want to change your registration in the middle of a piece, like between verses of a hymn, or between sections of a piece, or in the middle of a tricky page turn?

If you've ever seen a Youtube video of an organist playing with a person or two standing beside her pulling knobs and turning pages, you've seen one of the solutions.

I don't usually employ an assistant; part of the reason for that is that the organ is relatively small and all of the stop knobs are close enough I can get to the them from the bench. I have pretty fast reflexes so I can grab a couple of them during the pause between verses of a hymn, reaching out to snag them like a frog catches flies. However, if there is a major change to be made, involving the turning on or off of several stops, particularly if the change involves both keyboards and the pedals all at once, there is another solution on most modern organs.

They are called pistons. Below each keyboard is a row of buttons--we have six of them. Each of those buttons can be programmed with the combination of stops I want to use, and, if I have a free hand, I can reach over and press the button and all of the stops will be changed instantly. This is quite a bit better than having to pull 15 stops out manually, as I once saw in a video from St. Sulpice in France where they have an amazing and venerable old organ which apparently does not have this system. As the organist reached the end of the first section there was a long pause while both assistants frantically pulled and pushed dozens of stops while the reverberation slowly died away. It was fun to watch. It's too bad I can't find that video anymore so you can watch it.



Now, below each keyboard on our organ is a group of pistons for that particular division of the organ: the upper keyboard (the swell) has one, the lower keyboard (the great) has one, and the pedals have one row--six pistons each. And, the entire organ all at once has a row of six, called generals, which will change all three of those divisions of the organ, swell, great, and pedal all at once, as pre-programmed.

Now suppose you don't have a free hand.

They've already thought of that. They are called toe studs, and there are just as many of those as there are buttons. In fact, they are a duplicate set, so that every button I've just mentioned has an equivalent toe stud so that you can perform all of the same operations with whatever appendage happens to be available. If you are an organist, you know that it may be all you can do to buy half a second with any hand or foot. I've even push a stop in with my nose, which I don't recommend for several reasons!

By my count we've just covered 48 buttons and toe studs on the console. There are more buttons, knobs, and levers, of course, but we'll get to them next time.

Friday, September 5, 2014

It's coming!

Talk about a first world problem.

I'm having some conflicting thoughts about the return of our organ console sometime next week. It has been nice to spend time with our piano, and only the piano. It feels a bit relaxing not to feel like one needs to simultaneously be a proficient organist and pianist, to take on the massive repertoire for both instruments at once, and to compose, improvise, and continually be learning new music for both instruments. Not to mention that the poor piano has suffered so much neglect lately at the hands of this so-called pianist that it was probably starting to wonder if I even cared anymore. So I've been enjoying the feeling of sitting at the piano every day, both because I get to reconnect with my musical instrument "roots" and also because it feels like a bit of a vacation.

Not that you'd notice that, I realize. There is the fact that the current state of the pianonoise sound archive is such that there are several more organ recordings than those for the piano, and the fact that I've blogged about nothing but the organ all summer. But this month I've made several piano recordings which you won't get to hear until I start rolling them out in October, and I promise to spend most of my forthcoming blogs, once the year gets rolling at the end of September, on the piano.

There was a time, not so long ago, when I was so excited by playing the organ I wondered what I had even seen in that instrument a few feet away with the single keyboard and only one type of sound. But then, I have the privilege of being able to wax hot and cold over both instruments. I get paid to play both of them, and, at the same time, both seem like a hobby.

It's just now that, making a luxury out of a necessity, I'm enjoying the sound, and the ease of operating, the piano. Recently I discovered a few 20th century pieces to tickle my congregation with. The voices of Rachmaninoff, Poulenc, Villa-Lobos and Leo Ornstein have echoed through the church. I think there was a little Marteau in there, too.

Several people in my congregation prefer the piano, and have told me so. They usually have the manners to add, "but I like it when you play the organ, too." It does seem, somehow, that the organ is a little harder for most folks to find friendly.

And yet one can find organ enthusiasts. They are frequently among the most enthusiastic enthusiasts anywhere. They have to be. It's an uphill climb. But I always liked mountain climbing (metaphorically speaking, anyway).

There is at least one fellow who much prefers the organ. He's been waiting patiently all summer. Next week we'll both get a dose of the sound that only comes when a fellow named Bach writes a piece for an instrument called the pipe organ. The rest of you poor slobs just don't know what you are missing!

This week we'll have one more crack at the piano, and some good old hymn tunes from our Methodist, piano-loving forebears. Then, next week, suddenly, in a twinkling, the majestic sound of the king of instruments returns.

It's really a wondrous machine.

Friday, August 29, 2014

A Young Person's Guide to the Organ

While we wait with fear and trembling for our organ console to arrive, let's go over the wealth of wonderful noises the organ will make when we've gotten it installed in our sanctuary again:

Organ stops come in six families.

There are the flute stops. Their sound is pretty obvious. There is more variety about them than you might think. Our organ has four of these customers, and they are all of a slightly different hue. Here are is a flute stop with the pipe capped at the top, called a bourdon:

[listen]

There is also a chimney flute, or in our case a rohr flute (the German equivalent), and a nice spitz flote which is an octave higher.

We've covered those already in a previous blog. We've also talked about foundation stops, which are the heart of the organ sound, and usually much louder than the flute stops (you'll hear the difference when each section is repeated on a flute stop instead of a principle stop), though they are still relatively vanilla compared to what comes next.

[listen]

...which are the reeds. Those are the trumpets and the krummhorn. Although often resplendant, or at least joyful (as in the first sections of the Christmas carol I played for you a couple of weeks ago on this blog), I take particular delight here in the impolite low flatulence that is our 16 foot tuba trombone stop, here interjecting a low C into the proceedings:

[listen]

What we haven't discussed yet are the strings. What these are generally good for are sustained, misty chords that hint at ethereal things. But you can do scales and arpeggios on them, too:

[listen]

Then there are the mutation stops. We've got two on our organ, and I'll let you hear both of them. They actually sound an octave and a fifth--or a third--higher than the note you are playing. The mutant aspect is no accident; by themselves they sound really strange. But when you combine them with more bland stops, they add a nice, if slightly exotic, color:

[listen]

[listen]

Most ranks of pipes contain one pipe per note. But there are also compound stops. Our mixture stops play three, or four, pipes per note. That means for each note you strike, you are hearing the fundamental note, the one you actually ordered, plus a fifth above that, and the octave above it. Two of our three mixture stops stop at three pipes; the one on our lower keyboard adds a fourth (a fifth above that, I think).

Mixtures don't do well by themselves, but added to a healthy chorus of foundations, give the organ that awesome sound that reminds some of us of Halloween. But they don't have to:

[listen]


Flutes, foundations, reeds, strings, mutations, and mixtures. And all of them had been invented by around the 15th century! That part of the organ is definitely NOT modern technology. But in a couple of weeks I'll show you what is.

Friday, August 22, 2014

How Low can you Go?

When I told everybody back in June that while our organ console and the wiring between the console and the pipe were getting repairs and new features the sound of our organ would remain the same because we weren't getting any new pipes or anything, it turns out I wasn't entirely correct.

That's all due to a sudden development last week wherein I discovered, in the middle of a conversation with a technician working in the pipe room, that it would indeed be possible to add a spectacular sonic feature to our organ.

The pitch of groups of pipes is given a number based on the length of the lowest pipe for that particular sound. And of course a longer pipe will make a lower sound, so a 2-foot stop will sound very high, and a 16 foot stop very low.

Now a 32-foot stop is really in the basement. It produces a nice grand rumble. And there aren't any such resplendent rumblers on any organs that I know of in Champaign-Urbana, nor are they all that common on pipe organs in general, for one very good reason: the pipes have to be in the neighborhood of 32 feet long!

There isn't any way we at Faith could actually install a rank of 32-foot pipes. For one thing, at today's prices, a single rank of pipes (one sound at one pipe per note; somewhere around 60 pipes) costs upwards of $40,000 (which is about 80% of the cost of our entire project). And for another, where in the heck would we put a bunch of 32-foot long pipes?

A few years ago I read about an interesting way to make it sound as if the organ had a 32-foot stop without actually going to all the trouble and expense of creating one. And I happened to mention that to our organ technician, Trevor, who said that contrary to my dashed hopes, it would in fact be easy to create one on our organ. It's called a Resultant, and here's how it works:

When you play a note, in addition to the note you called into action, there are other, higher pitches that sound as well. They are called overtones (you can read about them here). The first overtone is always an octave above the note played (called the fundamental), and the second is a fifth above that. Now if you combine two existing ranks of pipes together, so that one note plays using one group of pipes and the fifth note above that plays on another group of pipes at the same time, you can fool the ear into thinking that what it is actually hearing are the first two overtones of the octave below that. So without actually playing very very low basement C, you can create the aural illusion that it is there anyway. Pretty sneaky! And since there are no new pipes involved, the cost is small. All that needs to be done is that a new stop knob has to be put in, and also a new wire or two in order to be able to send signals to both ranks at once, and the rest is done courtesy of the new software in the little computer screen that comes with the console which allows all kinds of things to be programmed in.

Trevor tried it out for me by temporarily rewiring the low C. If you felt a slight earth tremor at 3:48 last Wednesday afternoon, that could be why. At that extremely low pitch it almost sounds like a helicopter, and is more vibration than sound. I won't even use it very often. You might well ask why I would want one. To which I have to answer: when I strike the final chord of a grand organ toccata, full organ, with the 32-foot down there to fill everything out, you'll know why. Better yet, you'll really feel it in your bones!

Friday, August 15, 2014

A Visit to Buzard's (part two)

I don't know what possessed me in my last installment to refer to Buzard's as a "factory." There is certainly nothing like a factory in the modern sense: nothing is automated, and they are not turning out hundreds of identical products. Instead, each organ is designed and built for a specific customer and a particular location. It may take a couple of years to build, and is still done by hand, mostly without the use of power tools.

Jean-Paul Buzard has been in business since 1984. Unfortunately, when our church organ was purchased, he had only been in business for a year and built I think one organ, so the committee wasn't sure he would have been a good choice to build ours. Too bad. He's certainly proven himself since then.

But the firm of Buzard is known nationally, and is busy in all 50 states--most of them, it seems, this summer! In the last few weeks they've installed a new organ of their own make in Pennsylvania, and re-tooled and moved organs in North Carolina and Texas. And those are just the ones I know about.

There are 16 employees at present. They punch in and out using the time-honored "drawknobs" in the hallway:


I wonder if the choice of stop says anything about the character of the employees (like, would the other employees make fun of you if you chose a 1' sifflote, or did everybody fight over who got to be the contra-bombard?).

It will be hard to convey the atmosphere in shop, but I'll try. On the first floor is a large workspace.

 

This is where the pipes and various other parts are made. But the room behind this one saw the most activity the day we were there. This is because they were shipping a new organ to Pennsylvania, wrapping the individual pipes in cellophane and putting them on a truck.

 

There were lots of fun things upstairs, too, such as the portative organ in the hallway, the plans on the wall for a possible new grand organ in the great hall at the university, and pieces from organs that let's just say need a little help to make their full potential, like the entire wall of magnetic relays that really is so 100 years ago.

 


There is the occasional rank of presently dispossessed pipes looking for a home. On the left are some of the smallest:




 

This bizarre looking confabulation of pipes is sitting in the tonal director's office (he's the one responsible for the sound of the organ). It is a compilation of all the C's on the various ranks of one organ, to test them for uniformity.  They don't normally all hang out together like that. Frankly, I don't think I've ever seen so many C notes in one place.

Not having an eye for the typical, I neglected to get a picture of a smiling Jean-Paul Buzard as he showed us all of these wonders or explained his passion for the organ and the art of organ building. We greatly enjoyed the tour. It was swell.


Pun intended.

Friday, August 8, 2014

A Visit to the Buzard Factory

Last week I went to the "organ hospital" to see what had become of our console. Sensitive organists may need to look away, or skip down to the next picture, because what follows is very graphic!


All the internal organs have been removed for rewiring, cleaning, re-bushing, and so on. Only the outer shell remains (Some insensitive clods I work with have been joking that the organ is just a "shell of its former self." Geez! :-)

Some of those pieces are below. For instance, I submit to you the "stop jamb"

Apparently those were all the pictures I had the strength to take! But I got plenty more from the factory tour, which I'll show off next week. And on a thrilling note, I'd like to make an announcement. The new parts for the console have arrived. Would you like to see them?

I thought you would. Here, for the first time, this sneak preview of our exciting new console!....

They are in those boxes, sitting in the front hallway of the Buzard factory. Don't feel cheated; I'm sure we'll all get to see them in their intended glory later on.

Friday, August 1, 2014

The Principal of the Matter

The foundation stops of the organ--the real "guts" of the organ sound, if you will (and many organists won't!)--are known variously as the "principles" or the "diapasons" or as "montre." This is because the organ speaks many languages.

The organ at our church is a German speaking instrument, so the stops there are known as principles. Their sound is somewhat "fluty," but they are much louder, and have a more aggressive tone than the flutes. This is because the width of the pipes (flue pipes, remember?) is much narrower than the pipes used for flute stops. Organ builders refer to this as the "scale" of the pipes. Generally a narrower scale results in a less rich sound. As for the volume? I think we owe some of that to Mr. Bernoulli and his principle but I haven't quite been able to figure it out given the technical nature of the Wikipedia articles! Besides, the organ builders got there several centuries ahead of either him or Newton.

In any case, foundation stops are necessary for accompanying the congregation during hymns, and since they aren't expected to be very quiet, they are always placed out front, where they are "on display" (which is what "Montre" means in French) and therefore can't be controlled dynamically by the shutters which separate the pipes out front from the ones in the pipe room behind (see my previous article if you want to crawl around in the pipe room).

not actual size

When you sit in a pew and stare up at the organ pipes, the ones you are looking at are the foundation pipes, or the principles. The rest of the organ pipes, some four-fifths, I would estimate, are the ones you can't see back in the pipe room.

I estimate our organ has some 1,000-1,200 pipes and this was recently affirmed by the head of our organ building firm in town. I don't have an exact number (shame on me) but you get the idea. I can't exactly take it home with me in the evenings to practice.